Fuel Instruments & Engineers Pvt. Ltd.
 
 
 
 
 
 
 

Computerised Fully Automatic Brinell Hardness Test er Model ( B 3000 PC - FA )

 
 
Computerised Fully Automatic Brinell Hardness Tester Model - B 3000-PC-FA
 
Computer, Ups and Computer table is not part of the Machine
Get A Quote
 
 
   
'FIE' Computerised Fully Automatic Brinell Hardness Tester Model - B 3000-PC-FA is fabricated from steel plates and is designed for precise loading system. It is fully automatic machine for production testing. Once the job is placed on testing table and press "Cycle Start" button. The job is raised and brought in contact with clamping device. Then identor is swivelled and brought in vertical loading position. The loading operation starts. After preset dwelling timer, unloading operation starts. As soon as load is fully removed, the indentor is swivelled and the image is digitalized using a CCD camera fitted on machine and captured by the PC.
The diameter of indentation is measured by PC and the Brinell Hardness is dis[layed on monitor with the help of "State of Art" technology software. The job is lowered down and here the auto cycle is over.
Operationally the machine can be operated after a lapse of interval without operation of push button, so that operator has only to do loading and unloadingof job on machine.
This tester is designed for measuring hardness of metallic parts with wide testing range from soft to hard and its accurate results are widely acclaimed.
This tester conforms to IS:2281, BS:10003 and ASTME-10.
 
Features :
 
Fully automatic machine for production testing.
Full computerised (PC based) Brinell Hardness tester.
Direct and accurate measurement Brinell hardness number using “ State of Art” image processing technology.
Wide testing range: From soft metal such as lead up to hardest, like tempered steel.
High accuracy & repeatability of measurement at all loads
 
Advanced Window XP based software :
 
Latest GUI features with user friendly software.
On line indentation setting and focusing on PC monitor.
Advances image processing : Algorithms implemented for precise calculations of hardness numbers with various options to cover all ranges of specimen.
Batch file processing : Option for data / storage and reports generation.
Statistical Evaluation : Software for calculating standard deviation, mean, medium, frequency distribution graph, variation graph etc.
Calibrating mode facility.
Extendibility for future advanced image processing analysis, requirements.
“ Auto measurement start “ from machine.
 
Scope of Supply :
Basic machine with CCD camera, optics with illumination systems and connecting cable.
PCI video capture card with driver software.
PC and windows operating system is to by produced by customer.
   
 
Brinell Hardness Tester
 
Technical Data :
   
     
 
Technical Data :
Load Range
250 to 3000 kgf in stages of 250 kgf
Max. test height
380 mm
Dept. of throat
200 mm
Machine height ( approx )
1185mm
Net Wight ( approx )
450 kg.
Drive Power
0.66 HP
Mains supply
415V, 50Hz, 3phase
Measuring accuracy with CCD camera and built in optics
0.01 mm
Dwell timer
1 to 99sec.
Raising/lowering
240 mm/min
Brinell Hardness Tester
   
Standard Accessories :
   
 
Standard Accessories :
Testing Table 200mm Ø
1 No.
Testing table 70mm Ø
1 No.
Ball holder 5mm
1 No.
Ball holder 10mm
1 No.
Test Block HB-5/750
1 No.
Test Block HB-10/3000
1 No.
Allen Spanner
4 Nos.
Telescopic cover for elevating screw protection
1 Set
Instruction Manual
1 No.
 
 
 
 
 
 
Designed by : MID   Hosted by : GID   Promoted by : PBD